I use nftables to set my firewall rules. I typically manually configure the rules myself. Recently, I just happened to dump the ruleset, and, much to my surprise, my config was gone, and it was replaced with an enourmous amount of extremely cryptic firewall rules. After a quick examination of the rules, I found that it was Docker that had modified them. And after some brief research, I found a number of open issues, just like this one, of people complaining about this behaviour. I think it’s an enourmous security risk to have Docker silently do this by default.

I have heard that Podman doesn’t suffer from this issue, as it is daemonless. If that is true, I will certainly be switching from Docker to Podman.

  • BearOfaTime@lemm.eeEnglish
    0·
    8 months ago

    Wow, thanks for the heads up.

    Looks like it affects dockerd, but not docker desktop.

    Any idea of the docker implementation in Proxmox or TrueNAS? (TrueNAS does containers if I remember right?)

  • JustEnoughDucks@feddit.nlEnglish
    0·
    8 months ago

    This is standard, but often unwanted, behavior of docker.

    Docker creates a bunch of chain rules, but IIRC, doesn’t modify actual incoming rules (at least it doesn’t for me) it just will make a chain rule for every internal docker network item to make sure all of the services can contact each other.

    Yes it is a security risk, but if you don’t have all ports forwarded, someone would still have to breach your internal network IIRC, so you would have many many more problems than docker.

    I think from the dev’s point of view (not that it is right or wrong), this is intended behavior simply because if docker didn’t do this, they would get 1,000 issues opened per day of people saying containers don’t work when they forgot to add a firewall rules for a new container.

    Option to disable this behavior would be 100x better then current, but what do I know lol

    • N0x0n@lemmy.mlEnglish
      0·
      8 months ago

      Option to disable this behavior would be 100x better then current, but what do I know lol

      Prevent docker from manipulating iptables

      Don’t know what it’s actually doing, I’m just learning how to work with nftables, but I saved that link in case oneday I want to manage the iptables rules myself :)

    • moonpiedumplings@programming.devEnglish
      0·
      8 months ago

      Yes it is a security risk, but if you don’t have all ports forwarded, someone would still have to breach your internal network IIRC, so you would have many many more problems than docker.

      I think from the dev’s point of view (not that it is right or wrong), this is intended behavior simply because if docker didn’t do this, they would get 1,000 issues opened per day of people saying containers don’t work when they forgot to add a firewall rules for a new container.

      My problem with this, is that when running a public facing server, this ends up with people exposing containers that really, really shouldn’t be exposed.

      Excerpt from another comment of mine:

      It’s only docker where you have to deal with something like this:

      ---
services:
  webtop:
    image: lscr.io/linuxserver/webtop:latest
    container_name: webtop
    security_opt:
      - seccomp:unconfined #optional
    environment:
      - PUID=1000
      - PGID=1000
      - TZ=Etc/UTC
      - SUBFOLDER=/ #optional
      - TITLE=Webtop #optional
    volumes:
      - /path/to/data:/config
      - /var/run/docker.sock:/var/run/docker.sock #optional
    ports:
      - 3000:3000
      - 3001:3001
    restart: unless-stopped

      Originally from here, edited for brevity.

      Resulting in exposed services. Feel free to look at shodan or zoomeye, internet connected search engines, for exposed versions of this service. This service is highly dangerous to expose, as it gives people an in to your system via the docker socket.

      • Adam@doomscroll.n8e.devEnglish
        0·
        8 months ago

        But… You literally have ports rules in there. Rules that expose ports.

        You don’t get to grumble that docker is doing something when you’re telling it to do it

        Dockers manipulation of nftables is pretty well defined in their documentation. If you dig deep everything is tagged and natted through to the docker internal networks.

        As to the usage of the docker socket that is widely advised against unless you really know what you’re doing.

        • moonpiedumplings@programming.devEnglish
          0·
          8 months ago

          Dockers manipulation of nftables is pretty well defined in their documentation

          Documentation people don’t read. People expect, that, like most other services, docker binds to ports/addresses behind the firewall. Literally no other container runtime/engine does this, including, notably, podman.

          As to the usage of the docker socket that is widely advised against unless you really know what you’re doing.

          Too bad people don’t read that advice. They just deploy the webtop docker compose, without understanding what any of it is. I like (hate?) linuxserver’s webtop, because it’s an example of the two of the worst footguns in docker in one

          To include the rest of my comment that I linked to:

          Do any of those poor saps on zoomeye expect that I can pwn them by literally opening a webpage?

          No. They expect their firewall to protect them by not allowing remote traffic to those ports. You can argue semantics all you want, but not informing people of this gives them another footgun to shoot themselves with. Hence, docker “bypasses” the firewall.

          On the other hand, podman respects your firewall rules. Yes, you have to edit the rules yourself. But that’s better than a footgun. The literal point of a firewall is to ensure that any services you accidentally have running aren’t exposed to the internet, and docker throws that out the window.

          You originally stated:

          I think from the dev’s point of view (not that it is right or wrong), this is intended behavior simply because if docker didn’t do this, they would get 1,000 issues opened per day of people saying containers don’t work when they forgot to add a firewall rules for a new container.

          And I’m trying to say that even if that was true, it would still be better than a footgun where people expose stuff that’s not supposed to be exposed.

          But that isn’t the case for podman. A quick look through the github issues for podman, and I don’t see it inundated with newbies asking “how to expose services?” because they assume the firewall port needs to be opened, probably. Instead, there are bug reports in the opposite direction, like this one, where services are being exposed despite the firewall being up.

          (I don’t have anything against you, I just really hate the way docker does things.)

          • Adam@doomscroll.n8e.devEnglish
            1·
            8 months ago

            Documentation people don’t read

            Too bad people don’t read that advice

            Sure, I get it, this stuff should be accessible for all. Easy to use with sane defaults and all that. But at the end of the day anyone wanting to using this stuff is exposing potential/actual vulnerabilites to the internet (via the OS, the software stack, the configuration, … ad nauseum), and the management and ultimate responsibility for that falls on their shoulders.

            If they’re not doing the absolute minimum of R’ingTFM for something as complex as Docker then what else has been missed?

            People expect, that, like most other services, docker binds to ports/addresses behind the firewall

            Unless you tell it otherwise that’s exactly what it does. If you don’t bind ports good luck accessing your NAT’d 172.17.0.x:3001 service from the internet. Podman has the exact same functionality.